texas waste code lookuppolyblend vs polyblend plus grout
Due to the nature of the waste, these landfills do not need to meet the security and permitting requirements of a hazardous/Class 1 landfill, and disposal costs are generally less. Code 335.10 - Shipping and Reporting Procedures Applicable to Generators of Hazardous Waste or Class 1 Waste Waste management method code to be used on e-manifests only. ), Oxygenated solvents (acetone, butanol, ethyl acetate, etc. WASTES (EXCEPT WASTEWATER AND SPENT CARBON FROM HYDROGEN CHLORIDE PURIFICATION) FROM THE PRODUCTION OR MANUFACTURING USE (AS A REACTANT, CHEMICAL INTERMEDIATE, OR COMPONENT IN A FORMULATING PROCESS) OF PENTACHLOROPHENOL, OR OF INTERMEDIATES USED TO PRODUCE DERIVATIVES. BAGHOUSE DUST AND FLOOR SWEEPINGS IN MILLING AND PACKAGING OPERATIONS FROM PRODUCTION OR FORMULATION OF ETHYLENEBISDITHIOCARBAMIC ACID AND ITS SALTS. With a total of 1,500 miles (2,400 km) of inland waterways, Alabama has among the . U.S. New-Home Sales Rise by 7.2% Despite Weakness in the Broader Sector. ; DISCARDED COMMERCIAL CHEMICAL PRODUCTS, OFF-SPECIFICATION SPECIES, CONTAINER RESIDUES, AND SPILL RESIDUES THEREOF), Alkaline solution (pH >12.5) with metals (antimony, arsenic, barium, beryllium, cadmium, chromium, cobalt, copper, lead, mercury, molybdenum, nickel, selenium, silver, thallium, vanadium, and zinc), Alkaline solution without metals (pH > 12.5), Aqueous solution (2 < pH < 12.5) containing reactive anions (azide, bromate, chlorate, cyanide, fluoride, hypochlorite, nitrite, perchlorate, and sulfide anions), Aqueous solution w/metals (< restricted levels and see waste code 121 for a list of metals), Aqueous solution with 10% or more total organic residues, Aqueous solution with <10% total organic residues, Off-specification, aged, or surplus inorganics, Halogenated solvents (chloroform, methyl chloride, perchloroethylene, etc. Farm - Vegetable & Drivers. HQ has N002 switched off. WASTEWATER SUMP RESIDUES FROM LIGHT OIL REFINING, INCLUDING, BUT NOT LIMITED TO, INTERCEPTING OR CONTAMINATION SUMP SLUDGES FROM THE RECOVERY OF COKE BY-PRODUCTS PRODUCED FROM COAL. Washington State solid or semisolid corrosive Dangerous Waste with a pH less than or equal to 2, or greater than or equal to 12.5, based upon a specific testing method. Enter the solid waste registration number in the "Facility Number" field. THE FOLLOWING SPENT NONHALOGENATED SOLVENTS: CRESOLS, CRESYLIC ACID, AND NITROBENZENE; AND THE STILL BOTTOMS FROM THE RECOVERY OF THESE SOLVENTS; ALL SPENT SOLVENT MIXTURES/BLENDS CONTAINING, BEFORE USE, A TOTAL OF TEN PERCENT OR MORE (BY VOLUME) OF ONE OR MORE OF THE ABOVE NONHALOGENATED SOLVENTS OR THOSE SOLVENTS LISTED IN F001, F002, AND F005; AND STILL BOTTOMS FROM THE RECOVERY OF THESE SPENT SOLVENTS AND SPENT SOLVENT MIXTURES. Class 2 wastes include, but are not limited to: Class 3 Waste Determination (30 TAC 335.507). When a generator receives a request for information for the purpose of an audit, the information that a generator has gathered to classify and code his waste stream must be submitted to the TCEQ. If a generator answers no to all parts of the questions in Part I AND the generator is INDUSTRIAL, then Part II of the checklist should be completed to further classify the waste as Class 1, 2 or 3.